At the factory conveyor , conveyor belts have been adjusted test machine , use is generally not a deviation problems. However, due to various reasons, the use of the conveyor belt deviation is more common problems . Here a simple analysis of its causes and remedy:
1 conveyor belt appears to extend needed tension .
2 sides of the conveyor belt tension leveling Heng not need to be recalibrated . Note that you can jog the conveyor belt when tuning and timely adjust the effect was observed , with the side to prevent damage to the rack with side and with Jisi stuck . If you really get stuck , you have to release all the tension , pull to the middle position manually .
3 are loose or fall off the conveyor belt needs to be replaced . Such as the selection Xin Yuan Food Equipment , these accessories are sporadic provided free for life .
4.V type roller stand side by accidental impact shift , you need to be recalibrated . If optional mounting bracket conveyor , does not have this possibility, but can not be fixed bracket conveyor local deviation correction .
5 . Outside rack severely impact deformation . This less prone to failure , in the event , you need to re- align the overall conveyor belt .
6 conveyor badly worn and need replacing.