We need to know while using some of the conveyor belt conveyor know, so many users will ask: "? Do conveyor curing process to master the conditions."
Bo conveyor professional answer:

"One, two hot plate vulcanizing machine pressurized plane should be parallel to each other.

2, hot plate heated by steam or electric heating.

3, the whole plate curing process, the pressure applied on the mold cavity area is not less than 30 MPa.

4, regardless of type of hot plate, the temperature distribution on the entire area of ​​the mold should be uniform.

5, the same hot plate temperature difference between the points between each point and the center does not exceed the maximum once.

6, between two adjacent plates corresponding location of the point temperature does not exceed once.

7, the maximum temperature at the center of the heat plate is not more than 0.5 degrees. "