Rubber water-stop rubber water stop is a natural rubber and various synthetic rubber as the main raw material, mixed with various additives and fillers, classics plasticate, mixing, pressing molding, the varieties and specifications, and are bridge, mountain, P, U, Z, b, T, H, E, Q, etc. According to the usage and can be classified as buried type rubber water-stop rubber water stop and back. The water stop material has good elasticity, abrasion resistance, aging resistance and tear resistance, ability to adapt to the deformation, good waterproof performance, temperature range of - 45 ℃ - + 60 ℃. When the temperature exceeds 70 ℃, and the rubber water-stop with strong oxidation or corroded by oil and other organic solvents, shall not use the rubber water-stop.
   Application to underground constructional works, dam, reservoir, swimming pool, roofing and other construction material and structure deformation seam water-proof.
   Specific attention is as follows:
   1 check hose shall not long time outdoor exposure, prevent the rain, don't contact with strong polluting chemicals.
   2 in the transportation and construction, to prevent mechanical and water-stop steel damage.
   3 construction process, check hose must be reliable fixation, avoiding displacement occurred when pouring concrete, guarantee water stop right there in the in the concrete.
   4 fixed water-stop methods are: using additional reinforcement fixed; Special fixture is fixed; Lead wire and fixed template, if you need perforated, can only choose in the edge of the installation area, shall not damage other parts.
   5 users order should according to the engineering structure, the calculation length of good product design drawings, heterotypic structure should have the drawings, as far as possible in the factory will check hose are connected into a whole, if you want to connect at the scene, can use electric heating plate vulcanizing bonding or cold bonding (rubber water-stop) or welding (plastic water-stop) method.