ZhongBo Industry and Mining Machinery Co.,Ltd is mainly engaged in the r&d, manufacturing and sales. Leading products are common, heat-resistant (high temperature), acid and alkali resistant, oil resistant, cold resistant, wear resistant, different properties such as general flame retardant cotton canvas (CC), nylon (NN) conveyor belt, polyester (EP) flat and large dip Angle gear sideband, with decorative pattern, such as conveyor belt. Below for everyone to introduce tubular conveyor belt use.
    Tubular conveyor in using process basically has the following several points. (1) closed. Tape forming tube in the operation, direct inclusion in transmission materials, and even in the process of return, the tape is round tube. Prevent the float in the sky, loss of the material and on. (2) the bending of delivery. Due to tape into tubes, have certain ability to detour, can be bent to delivery. (3) large obliquity conveyor. Tape into tubes, for material extrusion effect to a certain extent, increase the frictional force, material and the adhesive tape ask for large obliquity conveyor. (4) reciprocating pump. Because the tape in the process of running, in bearing section and return period are all tubular, so can enough reciprocating pump. (5) high load conveyor at a high speed. USES the high tenacity of canvas or rope as a core, tape the tensile strength is big, long stretch, good flexing resistance, which can be suitable for long distance, large capacity, high speed tubular conveyor belt conveying conditions on the use of belt body itself puts forward a set of requirements. A tubular belt should have adequate transverse bending just sex. The size of the stiffness is the key to whether tubular. Rigidity is too big, difficult to into tube; TaYao rigidity is too small, easily. The second is to make the tubular belt has good elasticity and longitudinal flexibility. In addition to the use of special structural design, ensure the lap part of tube when both sides have good flexing, in order to meet the tape into the pipe after the sealing performance and shape stability. 3 it is tubular with each sub should have excellent physical properties. Because forming tubular tubular belt conveying material, cover rubber under tensile state is outside its sunlight, thus requirements cover glue has high weather resistance, ozone, uv resistance, crack resistance, and the rubber cover not only has the above properties, also should have good wear resistance, the stick adhesive cloth layer should use good glue, flexible force should be low, repeated bending fatigue resistant rubber.