Conveyor belt tension is insufficient: if the lack of conveyor belt tension, its operation is not stable, but also can produce the belt deviation.

If outdoor conveyor and suffer from strong winds, the conveyor belt for the conveying belt or lateral displacement and pressure on the conveying belt supporting roller or float are sufficient to produce conveyer belt deviation, the same if indoor conveyor experience strong winds may cause deviation.

Freeze: conveyor roller for conveyer, driving drum, drum to pre cold and freezing weather, so that parts will deflect operation is not smooth, and the rest as apron, clean serious in addition to cause deviation will also hurt the conveyor belt.

Conveyor deviation reasons can be broadly divided into mechanical components to support the conveyor belt and conveying belt and so contributed to the reasons for the formation of.

Conveyor belt conveyor belt in the canvas canvas: to support the tension, if for making bad due to tension is not the average, which can generate the conveying belt deviation.

The conveyer belt joint quality, conveyor belt conveyor belt joint is not straight, not engage in tension, and the oncoming withstands tension, the conveyer belt joint phenomena are not straight, the results can not avoid the belt deviation.

Conveyor belt thickness, uneven width and weight or hardness, because the conveying belt joint thickness, width, weight or hardness is hard to control, can produce the belt deviation.

The mechanical part and the conveying belt with bad reasons: feeding is not on the conveyor belt because of poor design or blockage chute reason causing blanking on the conveyor belt conveyor belt is concentrated in a side and not fall in the central part, can cause the conveyer belt and the roller of the conveyer belt friction increases and the internal tension does not mean thus, the conveying belt deviation, serious person can have spillover case raw material conveyer.