Features 1 full use of belt conveyor. The big obliquity conveying material, as far as possible is designed according to the circuit layout requirements, improve space utilization;

2 where possible, as far as possible to increase the radius of curvature of curves, especially the high tension area;

Should give full consideration to the support element box pressing roller and the conveyor belt contact form 3 design and installation, make line contact, especially short rollers, should be designed and the conveying angle belt between the adjustable forms, in order to facilitate the adjustment in actual use;

4 try to reduce the friction of the motion between components, in the design, the short roller plastic bag. So, short rollers and conveyor belt friction increase, to the use of belt conveyor is extremely unfavorable to the;

5 as far as possible the high belt speed to reduce equipment cost, machine, and the conveying belt received low tension, when necessary, can be used to prevent splashing device material;

6 need to consider the soft starting and stopping of heavy belt conveyor, to avoid the generation of dynamic load additional during start-up and shut-down in;

7 in the angle is larger, should set the conveying belt to avoid limiting device, conveying transverse swinging, especially the return period.