Corrugated sidewall conveyor belt has good performance, and is widely used. The general corrugated sidewall conveyer belt by the baseband, corrugated wall and diaphragm is composed of three parts.

Baseband role in flat conveyer belt structure is similar, the traction element conveyor, tension. Because the supporting belt is difficult, so the requirements of baseband transverse should have enough stiffness, the method is employed in the baseband core body lateral join special reinforcement layer, but in the longitudinal still keep proper flexibility, in order to facilitate the conveyor belt after bending roll and in the concave convex segment.

Corrugated wall is used to increase the bearing section of the material. Flange using corrugated reason is for conveyer belt passes through the through the roller and the convex, concave arc segment, additional tensile, compressive stress large retaining side not to be, and can be freely telescopic. Wavy rectangular, S shape, W shape and WM shape rib, commonly used is the S shape. Flange should be in possession of the conveyor belt on the baseband width is small, but the same waveform from the upper flange extending length is longer on the bending conveyor belt more favorable. The structure characteristics of W type and WM type layout and design of the machine is very favorable. Using W shaped and WM shaped corrugated wall, wherein the small waveform can form a sealing structure better and diaphragm, in favor of large inclination conveying powdery material.

Diaphragm to protect the material does not produce downward sliding effect. Diaphragm used at present is in the form of T shape, C shape, TC shape, TS shape and TCS shape 5. The TS shape is the partition structure of embedded type, can be used in conveyor poor working conditions, wear serious, this structure has the advantage of convenient installation and disassembly. When the conveyor angle less than 18 degrees, generally do not add diaphragm; when the angle between 18-45 degrees, partition with T shape; when the inclination angle in 45-90 degrees, partition with C shape; when the diaphragm plate height is more than 280mm, should choose TC or TCS shaped.

Corrugated sidewall conveyor belt according to the baseband. The combination form of diaphragms and corrugated wall into 4.