Cold bonding head, which is the use of cold bonding adhesive to the joint. This joint approach than belt high joint efficiency, but also more economical, should be able to have a better fitting effect, but from a practical point of view, due to process conditions are relatively rare grasp, in addition to affecting the quality of the adhesive joints is very large , so it is not very stable.

1, steel cord conveyor belt joints

Steel cord conveyor belt conveyor belt joint connector technology is the most complex of all, not only the process more complicated, it was designed connector size parameter is also up. Different levels of different joint structure selected product.

2, the method of fitting

Hot vulcanized joints, proved to be the best method for a joint, the joint can be high efficiency, but also very stable, the joint life expectancy is long, the belt line is easy to grasp. But the presence of process cumbersome, costly, long-time joint operations and other shortcomings.

Due to the structure of the entire core with special joints is not easy, so most use of mechanical joints approach, which is deducted connector. But more than eight tape, to the joint effect of general approaches are still using thermal curing joints. Structural joints are finger joints. Heat curing process PVC and PVG joints whole flame retardant conveyor belt is more complex, the equipment requirements are relatively high.

3, PVC and PVG whole core fire-retardant conveyor belt joints

Conveyor belt joint approach are: several commonly used methods of mechanical joints, cold adhesive joint, hot vulcanized joints.

Mechanical joint fittings deduction is generally used, convenient method of this connector is also more economical, but inefficient joints, easily damaged, have an impact on the life of the conveyor belt products. In the whole flame retardant PVC and PVG conveyor belt joint anti-static, generally 8 with the following products have adopted this joint approach.

All must be connected to the conveyor belt into the ring to actually use, so the conveyor belt joints is often a key part of preparation. A direct impact on the quality of the joint life of the conveyor belt conveyor line and can smooth running smoothly.