Safe operation of belt conveyors , put more attention on explanation  the belt conveyor safety knowledge , our skilled safe operation it is very helpful ! Here is new for everyone with an 8- point summary of safety , carefully optimistic , to ensure safety
A belt conveyor installation method should be required to install a fixed basis. Before moving conveyor officially running wheels should live with a triangular wedge or stopped with the brake . So as not to move the work occurs more than one job in parallel conveyor between the machine and the machine should be one meter channel between the machine and the wall.
Second, the conveyor belt should be checked before use various moving parts , fasteners and bearing tape device is normal , protective equipment are complete . Tension before starting the tape shall be adjusted to the appropriate level.
Third, the no-load belt conveyor should start . Once it is operating normally before feeding . Prohibited after the first feeding drive.
Fourth, the drive belt machine , coupling, drive roller , and other parts to be fitted with rear drum protective railings and shields , otherwise people do not accidentally leaned above , personal accident occurs .
V. cuffs staff legs , skirts if truss , will be involved in when you pay attention to the belt roller , causing casualties.
Sixth, the belt conveyor is running, hand to fiddle idlers , but also prone to injury accident
Seven, the belt is running with the tool belt dial are also prone to wandering incidents .
Eight , handling belts issues must stop.