How to maintain the mesh belt conveyor belt conveyor user is facing. Strong senior technicians today to tell you about the maintenance of the conveyor belt ten:
1, to avoid roller covered by material, causing rotation ineffective to prevent leakage of material between the card in the drum and the tape, note the lubrication of moving parts, but not the oil belt.
2, seeks to avoid starting with a load.
3, tapes deviation occurs, should take timely corrective measures.
4, found that local damage shall promptly repair tape, in order to avoid expanding.
5, to avoid being tape rack, pillars or massive block of material, to prevent misfortune to scratch the rip.
6, mesh belt conveyor selection should be reasonable and not to different species, different models and different specifications together with conveyor belts.
7, mesh belt conveyor preferably vulcanized bonding, such as using metal clamp connection, do not break too much with the core fabric to keep the conveyor belt of the effective tensile strength.
8, the whereabouts of the material should be directed to the same conveyor belt running direction consistent, try not retrograde, while reducing material drop height (suggested less than 1 m) to reduce the impact of falling material. To uniform feeding, to avoid local load is too large or clogged splice mouth, in splice mouth, mesh belt conveyor idler cushion should be used, and should increase the density of the roller.
9 Do not allow hunting belt, keeping idler roller rotation and side retaining flexibility.
10, mesh belt conveyor cleaning device or barrier should be safe, effective, and should not wear belts.