First, the joint method:

All belts must be connected into the ring to use, so the conveyor belt joint direct impact on the life of conveyor belts and conveyor lines can smooth running smoothly. General conveyor belt joint commonly used method has mechanical joint, cold adhesive joint, hot vulcanization joints.

Second, transport considerations:

The use of cranes moving conveyor belt, the best use ropes and lifting bars. First a steel rod through the hole with a mandrel and a rope with a strut bars Diaozhu conveyor lift both ends. Lifting being careful not to damage the rope belt edges. In the absence of bars and strut circumstances, may be a fabric having a sufficient strength lifting rope passes through the spindle hole. However, in contact with the rope and place mats an object should be to prevent a bad piece of rope belt edges.

Shall not be inserted into the coil inside the lifting spreader may not be on a rope around the coil lifting, roll to the side to prevent belt slippage. You can also use a forklift to move sufficient bearing capacity crane, but not damage the outer belt.

Third, Caution:

(A) avoid dragging roller covered by material, causing rotation ineffective to prevent leakage of material in the drum and the conveyor belt between cards, note lubricating moving parts, but not oil belt;

(2) to avoid the conveyor load start;

(3) conveyor belt deviation occurs, should take timely measures to correct;

(4) found that local damage shall promptly repair conveyor belt, so to expand;

(5) Avoid being conveyor frame, strong material support or block the block, to prevent the misfortune to scratch the rip.