ZhongBo Industry and Mining Machinery Co.,Ltd Main Products:
   
    General, heat (temperature), acid, oil, cold, abrasion, flame and other general performance of different cotton canvas (CC), Nylon (NN), polyester (EP) conveyor belts and other large angle flat file sideband tread belt, other special-shaped conveyor belt. And a roller, roller, frame, electric roller conveyors such ancillary products. Drive pulley; bend pulley; electric drum; magnetic pulley (magnetic drum); Care roll; stent; lug; tensioner; sweepers; couplings TD75 transportation machinery and ancillary products more than 200 kinds.

Here to tell you about the characteristics of corrugated sidewall conveyor belt, as well as the generation and handling wear condition.

Corrugated Sidewall Conveyor Belt requires a certain tensile strength and abrasion resistance. One of the remaining free section of corrugated sidewall conveyor belt, in order to meet the requirements of the angle bend, the tape longitudinal flexibility is required, a certain degree of lateral stiffness is required. Ring rubber production corrugated sidewall conveyor belt with special structure lateral rigidity baseband to solve large-sized conveyor belt on the return process collapse phenomenon.
Baseband structure
The baseband is covered by the gum, under plastic cover; belt core and lateral rigid layer composed of four parts. Plastic cover on the thickness of 3-6mm; under plastic cover thickness is 1.5-4.5mm. With a core material under tension, the material can be cotton canvas (CC), nylon canvas (NN), polyester canvas (EP) or rope (ST). In order to increase lateral rigidity of the base band, adding a special strengthening of the core layer, said lateral rigid layer. Baseband width specifications, the same as ordinary tape, in accordance with the standard GB7984-87.
Corrugated sidewall belts according to the principle of using the corrugated wall of the manufacturing process carried out reform and innovation, the wavy edge interior patch set ripstop canvas layer to enhance the corrugated wall tear resistance, flex resistance, avoid tension and compression which led wall is torn, increasing the wall of life. S-shaped corrugated wall at carrying capacity can be divided into light (N), medium (S) and heavy (ES).
Ring rubber diaphragms produced using fiber composite materials made of very of large, enhanced impact resistance force to avoid the partition due to deformation.
In the case of heavy wear for easy maintenance, diaphragm can be made ornament embedded, such as TS and TCS. Conveyor tilt angle less than 40 degrees, with a diaphragm type T or TS; tilt angle greater than 40 degrees, with a diaphragm type C, TC type or TCS.
Arranged diaphragm spacing should be considered with corrugated wall peaks correspond. To prevent the material from both leave out and unloading cracks caused by accumulation of material corner.
Ring rubber producing corrugated sidewall conveyor belt, ribs, diaphragm bonding with baseband using quadratic temperature heat curing adhesive, high bonding strength, bonding firm, smooth, can not afford to board, do not fall off. Between the diaphragm and the corrugated wall with screw connection, increasing the overall rigidity and improve performance, solve the problem of material leakage.