ZhongBo Industry and Mining Machinery Co.,Ltd Main Products:
   
    General, heat (temperature), acid, oil, cold, abrasion, flame and other general performance of different cotton canvas (CC), Nylon (NN), polyester (EP) conveyor belts and other large angle flat file sideband tread belt, other special-shaped conveyor belt. And a roller, roller, frame, electric roller conveyors such ancillary products. Drive pulley; bend pulley; electric drum; magnetic pulley (magnetic drum); Care roll; stent; lug; tensioner; sweepers; couplings TD75 transportation machinery and ancillary products more than 200 kinds. A variety of transportation equipment by the majority of new and old customers for their support.

    Following on from my belt conveyor to introduce how safe operation, to improve the efficiency of the conveyor and prolong life.

Conveyor machine next to or related operations indoor prohibited accumulation of flammable, explosive materials, and all grease fittings and coal, etc., under normal circumstances is not allowed after the conveyor belt installation with fire, welding processing rack, special needs to be taken when necessary preventive measures; transporting goods across the length of the roller on the interval is appropriate metal plates, wood, or other similar materials for protection, the protection applied to the conveyor idlers began the first deflection roller before the protective plate edge should have sufficient rigidity to the outer diameter shall not be greater than the distance of 5mm.

Belt Conveyor moving parts either manually or self-propelled installation should stop after stop device; non-specialized personnel never conveyor channel crossing or from below through the conveyor or channel across the top of the table, the shall be fitted with protective devices to prevent materials falling. Bolt connection must be treated according to design requirements and tightened with a special tool, machine head, tail and tensioning device redirection site site and the adjacent two folding rollers folded reaching more than 3 ° when they considered dangerous easy to pinch parts, rubber wide belt must have sufficient strength, low intensity prohibited instead of high-strength conveyor belt, the braking device must be in braking action can readily state. Its braking friction surface without any obstruction defects or glue braking performance oil; normal and emergency braking device should use eye-catching signs and should be located in a position for easy operation, tripper car brakes should be sensitive and reliable. Its limit clamping device should be able to work independently of the state of maximum wind without being blown by the wind. Rail end stops should be set to ensure tripper car does not derailed, do not fall over. Hoods and the lower edge of the funnel portion extending above the ground when the distance is greater than 300mm, the edge should be taken inwardly bent angle or curling and other measures. Conveyor Covers should be sealed tight, flame-retardant materials should be used; hand tools should be free to remove or tighten its observation window should be located in the material can be easily observed in the location of the operation; dried powder material conveying except when located outside the sealed cover custody transfer, should set the vacuuming or dusting devices. Non-transport block is greater than or equal to 0.5 times the bandwidth of the material; palletizing or use of Bulk material conveyor tail wheel beside non-stacked materials. To prevent the influx of stockpiles slump machine, relocated conveyor machine transference and transference boom within the region under strictly prohibited stay; transference should ensure that staff are fully equipped to communicate information quickly, security measures sufficient condition under transference, lifting devices must be installed to prevent accidental falling or rising outriggers and to prevent reverse safety device handle; handle operating force not greater than 300N; must be before moving down to the lowest position the frame body, and cut off the power. The outer edge of the conveyor to avoid sharp edges, sharp edges can not be eliminated when their personnel should be added near the site protection; conveyor drives and steering position does not allow on-site free to change. Drive and suspension or supporting parts must be firmly connected to stable; conveyor between the minimum width of the channel, escalators, platform side guard railing height should comply with the relevant provisions of the standard; runs between channels, high-speed moving parts or drive near the device should not be rest stopovers; conveyor under normal operating conditions shall have sufficient stability and strength, and its material properties must be selected and throughput requirements, not overloaded with the need to prevent clogging and overflow, maintaining smooth transportation, rubber conveyor belt should for a particular load and transport properties of materials sufficient width; conveyor inclination must be designed to prevent material slipping under normal operating conditions or rolled; should be set to ensure uniform feeding of the control device; hopper or chute wall slope, discharge The location and size of the mouth must be able to ensure that the material flow by gravity itself automatically; feed point should be located in the horizontal section, and set the guide plate, by the feed point must be located on the inclined section, the auxiliary charging facility to be located; vertical pull tightening devices section shall be installed blanking plate; feed point should be taken to reduce the impact of the measures, handling viscous materials, the roller surface, the surface should be set with a return period of the cleaning device adapted to tilt the tail section of the conveyor belt wear cylinder block material should be set before the scraper conveyor deviation caused by the elimination of all possible hidden dangers, inclined belt conveyors should be installed to prevent speeding or reversal of the safety device, the device is cut off or the power failure protective effect;