ZhongBo Industry and Mining Machinery Co.,Ltd is mainly engaged in the r&d, manufacturing and sales. Leading products are common, heat-resistant (high temperature), acid and alkali resistant, oil resistant, cold resistant, wear resistant, different properties such as general flame retardant cotton canvas (CC), nylon (NN) conveyor belt, polyester (EP) flat and large dip Angle gear sideband, with decorative pattern, such as conveyor belt.
Patterned conveyor belt is by working for the decorative pattern of cover rubber and not in the plane of the face to cover rubber with Angle composed of core conveyor belt. Decorative pattern conveyor belt in the process of transportation and storage should pay attention to the save method. If improper will delay in transporting and storing short service life of the conveyor belt, will lead to worse conveyor belt breakage, can't normal use.
Pattern conveyor belt features: suitable for conveying Angle of 0 ~ 40 ° material to prevent slipping. There is higher than the belt body on the surface of the "people" word pattern, pattern but speak but closed, each kind of pattern can be divided into high, medium and low three, apply to 30 degree Angle or less horizontal transport packaging. If in case into a groove, but instead of herringbone pattern.
Pattern conveyor belt maintenance methods:
Conveyor belt type, structure, specifications, conditions of layers should be used according to the reasonable choice.
During the period of storage, conveyor belt must be placed in rolls, not folding, during the placement should be turning a quarterly.
Storage at the warehouse temperature should be kept between 18 to 40 ℃, relative humidity should be kept between 50-80%.
4 different types, specifications and the layer number of conveyor belt should not be used together, the best joint connection with glue.
During transportation and storage, should keep clean and avoid direct sunlight or snow and rain leaching leaching, prevent from acid, alkali, oil, organic solvents, such as physical contact, and distance from the heating device is one meter outside.
Conveyor belt running speed should not be commonly more than 2. 5 m/s, large blocks, abrasion resistant material and use fixed discharging device should be adopted as far as possible low speed.
Conveyor drive roller, drive roller and the relationship between conveyor belt layers and the diameter, the redirection roller and the supporting roller groove Angle requirements shall be according to the regulations of the design of the conveyor, reasonable selection.
Feeding direction should be along the conveyor belt running direction, to reduce the material down the impact on the conveyor belt shall adopt when chute, reduce material falling distance; Conveyor belt material section should be shortened, impact idler roller spacing and used for the leak, take to use soft moderate keep-off board, lest gear plate quality, scraping the broken belt of the belt surface.
When maintenance pattern conveyor belt can do more than summarize some as far as possible, so that will be beneficial to prolonging life pattern conveyor belt, make the enterprise get better benefits. And delivery with a good quality for we will have very good effect in production, to reduce unnecessary accidents.