Non-slip conveyor belt maintenance method
Non-slip conveyor belt in transportation and storage, should be kept clean to avoid direct sunlight or rain immersion tube, prevent and acid, alkali, oil, organic solvent and other material contact, and distance heating device other than one meter.
Storage warehouse temperature should be keep in eighteen - ℃ between, relative humidity should be keep in between fifty - 80%.
Storage period, conveyor belt must be coil placed, not folding, place the period shall be turning a quarterly.
Different types and specifications of the layer number of conveyor belt should not be used together, the joint had better use glue joint method.
Conveyor belt type, structure, specifications, layer number should be based on conditions of use reasonable choice.
Conveyor belt speed should not be commonly more than 2.5 m/s, size, abrasiveness big material and use fixed discharge device should as far as possible the low speed.
Conveyor transmission drum diameter and conveyer belt cloth layer relationships, drive roller, about roller supporting and roller groove Angle requirements should be based on conveyor design regulations, reasonable selection.
Feed direction should be the direction of the operation of the conveyor belt, to reduce the material falling on the impact of the conveyor belt shall adopt chute, reduce material falling distance; Conveyor belt material by paragraph should shorten the roller spacing and the buffer roller for leakage material, with the soft to moderate keep-off plate, in order to avoid file material plate is excellent, scraping the broken belt with surface.
ZhongBo Industry and Mining Machinery Co.,Ltd welcome your order!