My company produces wavy flange belt conveyor, advanced technology, materials, can meet various requirements of transportation in different industries, different materials, and price concessions, welcomed, below small make up mainly to introduce my company some improvements on the belt conveyor with corrugated side walls, to better improve work efficiency.

The belt conveyor. For general use of bulk materials continuous conveying equipment. Due to the use of the tape corrugated wall and diaphragm has, therefore particularly suitable for the large inclination conveyor. The products are widely used in coal, food, building materials, chemical industry, hydropower and metallurgical industry department.

1 supporting belt device improvement

The original corrugated sidewall angle conveyor return period of use is the ordinary fixed belt conveyor parallel to the lower roller carrier tape. Roller is easy to generate mosaic and tape the skirt using embedded in, serious when can damage diaphragm. Often conveyor in about a year of use, tape damage has been very serious, must be replaced, this gives users a great loss in economy.

In view of the above situation, we have to return roller is improved, in order to support belt device to replace the new design of the parallel roller. New support belt device is composed of 2 small rollers, nylon elastic ring belt and a bracket. The supporting belt device fixed bottom set up 2 small role of the roller, the annular nylon belt is sheathed on the 2 small supporting roller, tensioning device are arranged on the bracket, the supporting belt device composed of. The device are respectively arranged in the 2 skirt hem flange belt under supporting return section of the adhesive tape. As the skirt does not directly contact the small roller, but contact with nylon, large contact area, overcomes the skirt into roller phenomenon.

The support belt device is no power device, the nylon belt running is passive, by friction effect, and running with wavy flange belt movement, and can always keep contact with skirt. Our factory has also developed with care with the use of devices with double support rollers. Double support structure of the pulley as shown in Figure 3, consists of a large wheel, guide wheel, a small fixed shaft and the bearing seat. Among the big wheel, a small guide wheel can separately rotate around the axis, can overcome the tail left, right tape 2 side tension caused by uneven 2 different edge extension, sliding phenomena caused by the skirt. Double support belt wheel is fixed at both ends of the axle by a bearing seat is fixed. The tape is running, support roller rotate along with the tape, reduce because of the friction damage, improve the service life of the skirt, but also can prolong service life of whole corrugated sidewall belt.

2 use effect

New corrugated sidewall conveyor return section support belt device has been used in Lianghe sugar Li Dong branch, sugar, sugar Zhefang Honghe back slag system of belt conveyor., have made the good use effect. Through the use of the 3 crop season, wear and tear tape is very small, almost no damage, by users praise. The corrugated sidewall conveyor return supporting device, reasonable design, good use performance and routine maintenance simple. The device can be used to extend the service life of the flange belt 3-4 times, save a lot of users