Professional rubber conveyor belt manufacturer will understand the warp crimp on canvas conveyor belt anti impact performance will have a certain impact, in order to improve the impact resistance of the conveyor belt, we all hope that the framework material of the conveyor belt of the longitude and latitude can also force, is this why?

We analyze the impact on the situation about the skeleton material: an object falling the impulse is the product quality and the falling velocity, the average stress and the effect of the object is equal to the product of the adhesive time. If the tape has a good buffer, so that the objects can have longer duration of action and the tape in the falling process, such as a punch in the sponge like stress, so the tape can be greatly reduced. If the warp modulus is too high, not easy to deformation, and an inflated balloon, external force to make the balloon explosion. If it is a lack of blowing balloons, in force under the same, not easy to explode. So, the warp crimp degree is very important.

The experienced customers always have this understanding: NN conveyor belt good anti impact performance, EP conveyor belt deviation, and why?

Because the cotton fibers with low modulus, the impact can be deformed, prolonging the action time, so the impact is relatively low, at the same time after deformation, contact area with the object becomes larger, so the impact of a smaller force. The current EP conveyor belt is the curl is too low, the ability of small deformation, cause the deformation after the impact area is small, the impact force point by many more, anti shock memory becomes worse. Elongation of domestic EP canvas is generally within 16%, while the EP canvas elongation abroad at around 20%, apparently breaking foreign EP canvas attack than domestic EP canvas, impact resistance. In fact, the difference is only the domestic EP canvas curling low 25%, thermal shrinkage is increased by about 3%, leading to the breaking elongation decreased by about 5%.

For the impact of EP conveyor belt, canvas, should be the zonal high strength, low warp crimp, warp crimp canvas.

According to foreign experience introduction, straight warp conveyor straight weft structure belt, although the band body is thinner, but because the weft crimp degree is lower, so the impact of skills better, and weft strength utilization rate is the best. We need more emphasis Is it right? Canvas thickness will impact performance, the key lies in the weft strength and modulus to. Our company are devoted to improve the impact resistance of the conveyor belt has been a breakthrough, the band body becomes thinner, weight becomes lighter, but the anti shock performance is better, thanks to the engineers of hard work, and for the great benefits for our customers. We sincerely welcome new and old customers to ask questions, supervise the production of our company R & D, welcome to order our products on the conveyor belt.