Patterned conveyor belt by the baseband and pattern of two parts. Due to the different transport materials and conveying Angle vary in size, shape and height requirement pattern is different also. Today urinate mainly introduce patterned conveyor belt conveyor belt with pattern base maintenance method, hope to share.
A conveyor belt, decorative pattern of maintenance:
1. The patterned conveyor belt in transportation and storage, should be kept clean to avoid direct sunlight or rain immersion tube, prevent and acid, alkali, oil, organic solvent and other material contact, and distance heating device other than one meter.
2. Storage warehouse temperature should be keep in eighteen - ℃, relative humidity between should be keep in between fifty - 80%.
3. Storage period, conveyor belt must be coil placed, not folding, place the period shall be turning a quarterly.
4. Different types and specifications of the layer number of conveyor belt should not be used together, the joint had better use glue joint method.
5. Conveyor belt type, structure, specifications, layer number should be based on conditions of use reasonable choice.
6. Conveyor belt speed should not be commonly more than 2. 5 m/s, size, abrasiveness big material and use fixed discharge device should as far as possible the low speed.
7. Conveyor transmission drum diameter and conveyer belt cloth layer relationships, drive roller, about roller supporting and roller groove Angle requirements should be based on conveyor design regulations, reasonable selection.
8. Feed direction should be the direction of the operation of the conveyor belt, to reduce the material falling on the impact of the conveyor belt shall adopt chute, reduce material falling distance; Conveyor belt material by paragraph should shorten the roller spacing and the buffer roller for leakage material, with the soft to moderate keep-off plate, in order to avoid file material plate is excellent, scraping the broken belt with surface.
Second, the pattern base conveyor belt of maintenance:
1. Conveyor belt in transportation and storage, should maintain clean, avoid direct sunlight, rain and snow dip tube, prevent and acid, alkali, oil, organic solvent and shadow ring rubber quality material contact, and distance heating device 1 metres.
2. When the temperature within the warehouse storage should be keep in, 15 ℃ - + and between ℃, relative humidity should be keep in between fifty - 80%.
3. Storage of conveyor belt must be coil placed, not fold, placed the period shall be turning a quarterly.
4. Conveyor belt speed should not be more than 5.0 m/s, transport size is big, wear resistance of the material and use fixed plough type discharge device should as far as possible when the low speed. Beyond the prescribed speed, can affect tape service life.
5. Conveyor transmission drum diameter and conveyer belt cloth layer relationship, drive roller about supporting roller and roller groove Angle requirements, should according to lose to the design of the machine regulation, reasonable selection.
6. To reduce the material impact on tape impact and abrasion, feed direction should be the tape operation direction; Material down to tape on the head should be decreased; Feeding mouth should avoid roller or roller's upper part; Rubber band by material paragraph should shorten the roller spacing and take buffer measures. To prevent scraping broken tape, keep-off device scraper cleaning device and discharge device and tape of the contact part points should adopt suitable hardness of the rubber sheet, do not use clamp have cloth layer glue to take the lead.