1) or-300 has excellent resistance to the level of oil in applications such as oil-treated coal. Petroleum-based oils.

2) has excellent oil resistance level or-200 is a variety of animals and cold temperatures reach -. 45'c vegetable oil

3) or-100 level is moderately resistant to oil operations, such as wood, flax. Cottonseed meal and soybean in the static conductivity is necessary.

4) HTN grade is recommended that transport hot asphalt temperature up 175 ℃, heat the oil.

Solid woven fabric conveyor belt product categories: 1 non-pressure PVC type.

After dipping solid fabric PVC paste, add PVC cover with solid carcass composition.

2.pvg type covering the top and bottom covered mainly by rubber.the with PVC-based non-pressure type, body, and then press the formation.

Construction features and applications:

1. Belt has good flame retardant and antistatic characteristics, fully meet the requirements mt-914 Roller, especially for coal mine transportation of flammable material conditions.

2. Solid fabric with high tensile strength and low elongation polyester filament warp as weft fibers, fibers, which uses high-intensity and moderate modulus nylon filament fabric. High strength, low elongation, light carcass, no separation of layers, good and excellent impact resistance, tear properties.

3. Non-pressure PVC is suitable for no more than 16 degrees.pvg type slope angle applications under dry conditions applicable to less than 20 degrees inclination in humid conditions apply.

4.pvg covered mainly by the type of rubber, so as to further improve the good roller performance, wet skid resistance, low temperature resistance, elongation and abrasion resistance bands. Therefore, it can not only improve but also extend the life of belt conveyor inclination.