Some conveyor belt storage and use precautions, and I hope to help some friends using the conveyor belt :

1 , the conveyor belt in the transport and storage should be kept clean to avoid direct sunlight, rain and snow Baptist leaching prevent substance contact with acids, alkalis, oils, organic solvents affect the quality of the rubber , and one meter distance outside heating devices.

2, the storage temperature should be kept at the Treasury between -15 ℃ to +40 ℃, relative humidity should be maintained between 50-80 %.

3 , stored in a roll conveyor shall be placed not folded , storage time should be turned over once each quarter .

4 , the conveyor belt running speed should not exceed 0.5 meters a second, the transport block degree , abrasive materials should be used with a large pear-shaped fixed unloading device and try to use low speed. When the tape exceeds a predetermined speed , will affect the life of the tape .

5, supporting the relationship between the diameter of the drive roller conveyor and the conveyor belt fabric layer drive roller and the idler pulley and the idler groove angle of the requirements , the design should be based on the provisions of the conveyor , a reasonable choice .

Just above the mouth should avoid feeding rollers or idlers ; 6 , in order to alleviate the impact of the tape material and wear , feeding should be directed along the direction of the tape ; material falling into the gap between the tape shawo should be reduced as much as possible within ; tape should be reduced by feeding section idler spacing and buffering measures taken . To prevent the scratch tape, stop feeding device , the blade cleaning means and a discharge means in the contact portion of the tape take appropriate hardness of the rubber sheet , do not use the first fabric layer is interposed on the tape .