This shop doesn't do the task, they say, the most important step is to promise. Do the task may involve changes to the CAM software, and even started using CAM for the first time. In addition, due to a multi task machine has to part ways, this machine process may require tools and path selection of different manufacturers have used in machining center. Manufacturers put tasks to prepare for these changes. Once the shop for this promise, they said, to the best level of the machine, the only an incremental factor. Here is the conveyor belt level advantage in multi task device view of content analysis: The 1 level is the life tools car classic, he said. When the machine to complete a part of this transformation, it can be part of the index of drilling operation. Milling machining is possible, although he is a machining center geometry movement is not typical. The Z axis movement of the machine instead of rotary motion is combined with X and the principal axis, and C axis. This actually means, part of the axial grinding surface all must follow, radius and circumference.
2 stage overcomes the limit by adding a conveyor belt. Conveyor belt deviation from the center of the drilling operation, is not only the radial or axial hole. The freedom of movement is allowed to deviate from the center, tighten tolerances grinding characteristics. A precision of the keyway is lapping, he became more easily automated conveyor belt at this level, scientific.www.shusongji.net/
Transport level 3 machining centers with the milling spindle is comparable to that of. In this sense, the machine began to lose on the lathe similarity. Rather than a top tower provides rotary drive, the machine may have locked the milling spindle rotation, will be held fixed tool. If at the level of 1 and 2 can be called "milling" machine, and then 3 machine is best described as a "milling."
This is a significant change in. The engineer said, offers several advantages for top tower as the main. A milling power. Spindle milling machine duplicate removal by comparing the upper or middle place in lathe. Another advantage is the angle of the characteristics, because the main index that provides a conveyor belt axis positioning. This makes the milling and the rotating part of the shaft angle drill has nothing to do, and do not influence each other. In fact, a portion of the possible functions of this machine production, and not at all the conveyor belt transmission functions fully play.