Machining of high temperature alloy is not traditionally considered to be a viable option, because the electric spark wire, nickel alloy, cutting from titanium issecond times more, but increasingly popular material more. In fact, not only can effectively reduce the hardening of the new electric spark wire cutting machine,usually metal mixture is proprietary, but with hitherto unknown to processingspeed and accuracy. Zhongbo industrial new conveyor belt standard IE seriesrepresents the next generation of EDM wire cutting technology. Tools from theexisting methods, machines, these machines that geometric accuracy of less than 0.0001 cm. They are almost eliminated the recast layer adverse and othersurface defects, once the company began to use the line cutting, the use of high temperature alloy more frequent.

This is a good reason, the design department have explained. Many years ago,when the plant began to integrate NC machine tool operator training, on-siteprogramming in the computer room. Now, a cam program is necessary for eachproduction workshop. Cam programmers to create the instruction packets, clearlyexplains each work should be up and running. Tool presets, labeled and placed in a car. This makes the operators in the field work and smooth operation. In addition, if there are problems, process was found to be at fault, not businessproblem. Knowing this, manufacturers do not need to turn to see machine factoryor conveying part of standing, make them prone to multi machine operation. In addition, the strategy can prevent the program at the top of the operator in accordance with the "experience" to adjust, because after the implementation ofchange often need to change the time can save more time than the potential.That is to say, to encourage the suggestion on future programmers will review process change package written in specific repetitive work directly on the workinstruction.