Belt conveyor maintenance skills a major role in two aspects, one starting and stopping of the conveyor belt; Second, the timely detection and troubleshooting belt conveyor. For more maintenance tips below:

(A) start-up and shutdown; conveyor generally should be started under no-load conditions. By installing several units in the conveyor belt should be used starting device can be blocked in order to start and stop a certain order through the control room. In addition, in order to prevent unexpected incidents, each conveyor should be set in place to start or stop button, you can stop Renyiyitai alone. In order to prevent the conveyor belt for some reason is vertical tear when the conveyor is longer than 30m, along the total length of the conveyor should be spaced a certain distance (e.g., 25-30m) to install a stop button.

(B) the discovery and troubleshooting; conveyor belt in order to ensure reliable operation, the most important is the timely detection and troubleshooting that may occur. For this reason the operator must always observe the work of transport, such as abnormal should timely manner. Mechanical workers should regularly inspect and examine any circumstances or components should be noted that this is very important. For example, a roller, does not seem very important, but a high-speed conveyor belt conveyor wear materials may soon put its shell worn out, the emergence of a blade, the blade could seriously damage an expensive conveyor belt. Workers trained or experienced staff to detect impending accidents and preventive measures. Conveyor belt conveyor in the entire conveyor costs account for a large proportion. In order to reduce the cost of replacement and repair conveyor must focus on operations and maintenance personnel training conveyor operation and maintenance of knowledge