Belt conveyor belt conveyor is also called , is the best efficient coal successive transport equipment, and other transportation equipment ( eg locomotive class ) compared with transporting long interval , large volume, a series of transportation and other advantages, and reliable operation , easy automation and centralized control to complete , especially for high-yield and efficient mine , belt conveyor coal mining has become mechatronic devices equipped with key skills .
 Caesar feed belt conveyor is a common question , the reason is multifaceted . Smart electromechanical points still need to remind you that the protection and conservation of strengthening usual .
 1 point spread material forwarded forwarded point spread mainly in the fall feed hopper , chute , etc. . If severe overload belt conveyors , belt conveyor chute gauge damage rubber apron , rubber apron contrast distant long chute at the plate from the belt so that the material out of the planning guide trough . The above situation can be in control of the delivery order to strengthen the protection of conservation to be resolved .
 2 Caesar feed concave section concave section belt vacant belt when the interval when the concave radius of curvature smaller segment will attack vacant belt , the belt into the groove at the moment to change the situation of attack , since the belt has left the trough idlers , usually groove angle becomes smaller, so that some of the material spread out . Thus , at the planning stage due able to use a larger radius of curvature of the concave section to prevent the onset of these conditions. As the mobile mechanical loading machine , stacker-reclaimer machines and equipment in order to shorten the trailer into the concave section where no arc transition planning interval, when belt width selection margin is small on a simple comparison of Caesar feed .
 3 material spreading spreading material deviation when the deviation of the belt when the belt is running due to the onset of a change in the height of the two margins , high side , the other side of the lower side of the material from a low spread , disposal solution is adjusted belt deviation.