1, the product of lifting : When using a crane moving conveyor belt , using ropes and lifting bars . When lifting, be careful not to damage the rope belt edges. Shall not be lifting the spreader insert coil rope shall not be wrapped around the coil lifting, to prevent side slip tape roll .

2, the use of the product : prohibited in the course of the different classes, different specifications of the tape, connected together using ; prevent folding hard- phase pressure . Use and care should be winding ; orientation and material handling materials in line with the falling speed of the tape with the direction and speed ; tension is not too much should not slip with the drive roller and the premise of the transition material is not guaranteed to operate with minimal tension ; or pull them slipping phenomenon , it is timely troubleshooting, adjusting tensioning system , maintaining a flexible elastic device ; empty before using the machine before starting general , in order to avoid overloading the motor and belt slippage , before stopping , all materials should tape emptied ; in conveying prohibited to make tape deviation or hunting run , should be timely adjusted .

3, the product of the joint : to use no matter what kind of conveyor belt must be connected into the ring post . Different types of conveyor belt joint approach is different, divided into: mechanical joints, cold adhesive joints , heat curing joint three. Joint quality directly affect the normal life of the belt use and must be treated with caution .