Roller conveyor plays an important role for strong support , promote and regulate on conveyor，so his use of operating not be underestimated. Today I explain the rational for everyone to use rollers .

Belt conveyor idler rollers often form groups to use. Reasonably designed roller group can not only save costs, but also to ensure reliable operation of the conveyor , at the same time is also good for the life of the belt . The following is set to introduce the distance between the rollers


Typically, the bulk material conveyor belt conveyor , roller bearing segment of the distance between about 0.8 to 1.5 meters , the return idler spacing in paragraph 2 to 3 meters , while carrying the entire conveyor segments in addition to special parts are case. A belt conveyor given throughout due to the different tension and load, the maximum allowable distance between rollers around is not the same , but the spacing arrangement of roller conveyor , etc. did not consider the specific circumstances of each part , so in the same using different sets of conveyor idler spacing is more in line with the actual situation on the conveyor machine , while the design of this sub- ranging idler spacing can reduce the number of the entire conveyor , thereby reducing operating costs conveyor. Idler spacing ranging from design without compromising the performance of the conveyor idler spacing increased, and thus would require increases when the idler spacing , you must ensure that the guide conveyor belt conveyor idlers still not allowed deviation occurs ; conveyor groove angle must remain unchanged , does not allow leakage of material .