All must be connected to the annular conveyor to practical use, it is critical belt joint preparation of a link. A direct impact on the quality of the joint life of the conveyor belt conveyor line and can smooth running smoothly.
A method of fitting
  Conveyor belt joint approach are: several commonly used methods of mechanical joints, cold adhesive joint, hot vulcanized joints.
  Generally refers to the use of mechanical joint fittings belt buckle, quick and easy method of this connector is also more economical, but inefficient joints, easily damaged, have an impact on the life of the conveyor belt products. In the whole flame retardant PVC and PVG conveyor belt joint anti-static, generally 8 with the following products have adopted this joint approach.
  Cold adhesive joints, which is carried out using cold bonding adhesive joints. This mechanical splice joint approach than high efficiency, but also more economical, the joint should be able to have good results, but from a practical point of view, due to process conditions are relatively rare to use, in addition to affecting the quality of the adhesive joint is very large, so it is not very stable.
  Hot vulcanized joints, proved to be the best kind of joint approach to ensure a high joint efficiency, but also very stable, the joint life expectancy is long, easy easy to grasp. But the presence of process cumbersome, costly, long-time joint operations and other shortcomings.
2, layered belt connector
  Can require the use of mechanical joints, cold adhesive joints, joints and other joints heat curing methods. Generally cold adhesive joints, hot vulcanized joints take is stepped structure joints.
3, PVC and PVG whole core fire-retardant conveyor belt joints
  Due to the structure of the entire core with special joints is not easy, so most use of mechanical joints way, that is, belt buckle connector. But more than eight tape, in order to ensure that the joint effect of general approaches are still using thermal curing joints. Structural joints are finger joints. Heat curing process PVC and PVG joints whole flame retardant conveyor belt is more complex, the equipment requirements are relatively high.
4, steel cord conveyor belt joints
  Steel cord conveyor belt conveyor belt joint connector technology is the most complex of all, not only the process more complicated, it was designed connector size parameter is also up. Different levels of different joint structure selected product.