Today I'll tell you about the belt debugging method to help you solve problems.

   Deviation conveyor belt conveyor is the most common faults, its timely and accurate processing is to protect its security and stability operations. Many phenomena and causes of deviation, to take a different approach depending on the adjustments and the reasons for deviation phenomenon, in order to effectively solve the problem. This article is based on years of field practice, from the user point of view, the use of mechanics analysis and explanation causes and treatment of such failure.


    Head or tail idler pulley drive roller conveyor axis is not perpendicular to the center line, causing the cylinder head or tail conveyor idler pulley at the deviation. The deflection rollers, the conveyor belt at both sides of the tension roller is inconsistent along the width direction of the traction force Fq also inconsistent suffered, to increment or decrement the trend, so that the conveyor will add to the descending direction of a moving force Fy , leading to the loose side of the conveyor belt deviation, the so-called "run loose without running tight." The adjustment method is: If the head drum roller conveyor deviation to the right, then the right side of the bearing seat should move forward, the conveyor roller deviation to the left, the left side of the bearing seat should move forward movement can also be the corresponding bearing shift left or the right side of the bearing after shift. Rear roller adjustment method and the head drum opposite. After repeated adjusted until transferred to the conveyor ideal location. Before adjusting the drive or idler pulley is best to install its exact location.

     
    The outer surface of the drum machining error, sticky material or wear caused by uneven diameter sizes, the conveyor will be wandering to the side of the larger diameter. The so-called "run do not run big small." Fq traction belt to produce a large-diameter side of a mobile component Fy, component force Fy in the role of an offset conveyor. In this case, the solution is to clean the surface of the drum stick materials, processing errors and uneven wear down to be replaced reprocessed plastic bag handling.

   For more details, please consult www.maxmpa.com