Belt installation quality requirements

Author:admin　Source:Original　Updated:2014-2-14

Department of belt drive chassis leveling each alignment, the lower part of the frame vacant office use or waste rock pad flat pad Woods real.

Bolts, nuts, spring washers, flat pad is complete, tighten.

Idlers complete, flexible rotation.

Belt clip joint firm, with tape at right angles.

Moderately elastic belt, no deviation.

Come ministries in place and adequate.

Motors, gearboxes running sound normal, smooth transmission, no vibration.

After tensioning hydraulic pressure adjustment, tighten the nut is good.

Cleaning uniform contact with the tape.

After the belt commissioning one hour, ministries and bearing temperature rise over the following provisions prohibited: temperature 80, temperature 40

Electrical equipment abutment shelves, wiring meets the requirements, the current setting is reasonable, sensitive and reliable variety of protective devices is strictly prohibited sparks, cables hanging neatly, each two meters a hook.

Previous: How to put scrap con

[ list Home ]

Next: Using conveyor belt