Conveyor terms of the selection of customization, installation, commissioning, operation or post-delivery maintenance should Cengcengbaguan as transportation equipment for the production costs are not small businesses, from installation to maintenance to be performed on the entire conveyor careful planning calculations, Understanding the specific circumstances of each conveyor belt, so everything under control, so production can proceed smoothly.

First, the rubber conveyor belt should not be installed too long, some though it was no problem, no problem test, but the position of the lower configuration, running two or three months later, with heavy drooping, hit the ground when starting. This is because the installation process does not take into account the elastic deformation and plastic deformation of the belt.

Canvas belt when installing or too short, you should leave a margin for future maintenance. If the length of the minimum basic tension in the spiral. Joint problems after a period of use, the conveyor belt margin is not sufficient to redo the joints, had to re-install the new belt.
    Ideal conveyor installation is that after installing the conveyor belt of moderate length (we should take into account summer and winter temperature differences affect the expansion of the conveyor), headroom is best to set aside a joint.

If you do not have any experience in this regard, we welcome you to contact us, Baoding Zhongbo Industry And Mining Machinery CO.Ltd has a number of experienced experts, ready to solve your problem.