Resistant conveyor belt selection :

Temperature resistant conveyor belt according to the transportation of materials , shape and surface structure parameters such as viscosity select the type of heat-resistant tape. For example, when the sintering temperature is conveyed 150 ℃ ore , coke, and other bulk materials , and materials with smaller contact area with the surface , with a surface temperature was maintained at 60-80 ℃; cement powder when transporting low viscosity material , the material with surface temperature and the temperature difference is very small .

Surface temperature are closely related with the life of the heat tape. Directly affects the adhesive strength and the adhesive covering the core , the core layer between the plastic cover wear resistance, crack resistance and the like. Shall, after full investigation, with a surface temperature measurement conditions , select the type of heat-resistant tape.

Thick plastic cover is to ensure that there is an important condition for a longer tape life . Recommended heat tape on the plastic cover thickness plastic 6-9mm, under plastic 2-4mm.
Heat Conveyor points:

The surface temperature of the entire strip to continuous, uninterrupted measurement, recording and monitoring, be sure to avoid unnecessary temperature ;

To be forced to tape the material cooled ( preferably combined layer was washed with water ) ;

Maintaining the material conveyed by the uniform distribution of bandwidth , but the focus point ;

Prevent oil presence ( trace oil cooling water ) exceeds the thermal damage to the belt itself ;

Equipped with heat tape material , once stopped , shall promptly take measures to remove the hot material ;

Heat the joint with the best thermal bonding method.