Endless conveyor belt automatic correction device consists of: It consists of roller tube, the tube with internal roller bearings , bearings and shaft with cylindrical rollers so that the shaft relative to the horizontal swing ; sides or one side of a bearing , the bearing diameter greater than the outer diameter of the central axis , the relative level between the swing.
Can be used for belt conveyor of offset , if endless conveyor belt deviation , the relative center of gravity which side to side which will increase the friction , in the role of friction , friction will end the conveyor belt running direction generating swing , this feature will automatically swing back to the middle of the running belt adjustment path .
This feature is generated by the structure of the product itself , and without a dedicated adjustment mechanism or other means to adjust the belt , the structure is simple, the operation of offset only in the self- oscillating idlers of offset , to avoid the belt damaged.
The belt conveyor head or tail put on a set of corresponding specifications of offset rollers, the belt is always in a normal position with rails , it can replace the old all of offset for the belt provides good correction means correcting . Structure is extremely simple, long life , maintenance-free , you can save a lot for the field operation of manpower .
Thus, in the endless conveyor belt deviation correction device for correcting after use to avoid the follow-up work to bring unnecessary trouble.