Patterned conveyor belt in the transport and storage , should be kept clean to avoid direct sunlight or rain and snow Baptist leaching , prevent acids, alkalis, oils, organic solvents and other substances in contact and one meter away from the heating device .
Storage temperature should be maintained at the warehouse when 18-40 ℃ , relative humidity should be maintained at 50 - 80%.
During storage , the conveyor belt to be placed into a roll , not folded , turning once during placement shall be on a quarterly basis .
Different types , specifications layers together belt should not use their joints preferably glued France .
Conveyor type, structure , size , number of layers should be based on the conditions of use reasonable choice.
Conveyor speed generally should not be greater than 2.5 m / s, large blocks , abrasive materials and the use of a large fixed speed unloading device should be adopted .
Conveyor belt drive pulley diameter cloth layer between the drive roller, supporting and bend pulley groove angle on the roller conveyor should be based on the requirements of the design requirements , a reasonable selection.
Feeding should be directed along the direction of the conveyor belt , the whereabouts of the material in order to reduce the impact on the conveyor chute should be adopted to reduce the material falling distance ; conveyor feed section should be shortened by the idler roller spacing and use of buffering material to drain with moderate conform with soft blocking plate to avoid stalls plate mark, scratch conveyor belt surface .