We all know that is a belt conveyor belt conveyor material carrier, is the most important part of the conveyor, but when in use will often be a problem, and that is torn. Tear can be said that a deadly killer conveyor, conveyor belt must be torn down once replaced, wasting a lot of time, so we should pay attention to tearing issues. Here I will introduce several tearing phenomenon that enables you to be vigilant.
    1, the transportation of materials containing sharp objects, which will most likely be sharp objects scratch belt, if once the deep scratches, the time will be in the transportation of materials, particularly those heavy material, it is easy to tearing phenomenon.
    2, the belt appears deviation, if the deviation occurs conveyor, conveyor belt will make discontinuity in some places by force, in some places by the force is small. In such a case where a large force may easily tear.
    3, cassette phenomenon is also likely to result in belt tear, when a large number of materials falling in the chute and they will be stuck conveyor belt, making conveyor can not operate normally, but the motor still continue to operate, making the belt on the situation is prone to tearing.
    4, are generally rubber conveyor belt, so it is prone to the phenomenon of aging, if those transporting heat, corrosive materials, will accelerate the aging. Once the belt is very prone to tear of aging.
    5, add the material when the material is dumped directly from a height, this design structure is very unreasonable, because a large gap materials, conveyor belt will cause great impact, if material containing sharp objects inside, it is easy the inner core conveyor belt broke, thus leading to a conveyor belt tear easily.
    These four points belt conveyor belt tearing main four points, if you want to know more about the knowledge of the conveyor belt, please continue to focus on small series of updates.