Rubber conveyor belt as an important component of transportation machinery, when in use, and occasionally there will be damage to the phenomenon. Produced during operation as a variety of surface damage. Rubber conveyor belts are the dangers of injury should not be overlooked.
First look at the conveyor belt thinning effect. Thinning of the rubber conveyor belt head at both ends overlap occurs when joints of varying thickness, running and roller sleeve bit startling produce strong scratching, wear both idlers, but also shorten the joint life, especially the new belt and even more prominent with the old lap. Curing method for the use of the connection conveyor is not the same as the thickness, lap even more difficult.
Furthermore, the rubber conveyor belt damage intensity decreases to a certain extent, especially in deep cover layer and the core layer after damage, directly affects the tensile strength of the conveyor belt, and reduce its strength.
In addition, damage to the core layer of steel cord conveyor belt when it may lead to corrosion of the steel cord inlet lose their strength. Intensity variation conveyor belt during operation encountered a sudden increase in load, such as cars and start with a load cassette, etc., accident prone belt breakage.
Injury not promptly treated, may cause shortened life belt, increasing the mine transportation costs.
Thus, if found to be damaged rubber conveyor belt, they should immediately adopt solutions. So as not to adversely affect its result.