First, the stationary conveyor installation method shall be delineated on the basis of the fixed. Mobile conveyor official before running wheels should live or with a triangular wedge brakes stopped. Avoid walking around the work place, there are multiple parallel conveyor homework, the machine and the machine between the machine and the wall should be between one meter channel.

Two, the conveyor should be checked before each run using sectors tape closure and carrying device is normal, protective equipment is complete. Tape tensioner degrees required before starting to adjust to the appropriate level.

Third, the belt conveyor should load start. Other operating normally before feeding. Prohibits driving after the first feeding.

Fourth, several conveyor running series, we should begin the discharge end, the sequence starts. All normal operation only after the feeding.

Five, running thrown belt run phenomenon, parking adjustments should not compromise in use, so worn edges and increase the load.

Six, working environment and sent the material temperature not higher than 50 ℃ and below -10 ℃. Shall not be transported with a pH of oils and organic solvents constituent materials.

VII prohibits pedestrians or on the conveyor belt by people.

Eight, parking must first stop before feeding, unloading and other material on the belt to make deposits before parking.

Nine, conveying the idea of ​​necessary mechanical and electrical insulation is good. Mobile conveyor cables do not Luanla and dragging. Electric motor must be grounded reliably.

Ten, belt slipping a hand to pull the belt is strictly prohibited, so as to avoid accidents.