ZhongBo Industry and Mining Machinery Co.,Ltd. is mainly engaged belt development, manufacturing and sales. The main products are ordinary, heat (temperature), acid, oil, cold, abrasion, flame and other general performance of different cotton canvas (CC), Nylon (NN), polyester (EP) conveyor belt and other flat and large inclination files sideband tread belt, other special-shaped conveyor belt. And a roller, roller, frame, electric roller conveyors such ancillary products, heat-resistant conveyor belt, canvas belt and rubber conveyor belt. Drive pulley; bend pulley; electric drum; magnetic pulley (magnetic drum); Care roll; stent; lug; tensioner; sweepers; couplings TD75 transportation machinery and ancillary products more than 200 kinds. Currently, Botswana Mining Machinery Co., Ltd. has become the largest conveyor belt manufacturer in Hebei Province.

   Here to tell you about the rubber conveyor belt idler structure latest mechanical function.

   There are strong detuning roller idlers and traction control two major components, idlers aligning roller with the usual group of the same, traction Used bolted in the middle shelf, through the rod and aligning roller set associative, in recent years Promotion developed a variety of strong and effective belt automatically adjusting a polarizer, the other strong dual rotary center structure of offset is shown, in principle, two rotation center of the roller, and in a rack link interconnect, when the tape to the side of the deviation, the rapid correction roller side, the other side also participate correction. Advantage of this device is to reduce the turning radius, rotation angle increases, prompting the detuning is power and sensitive, rapid, reversible self-aligning roller belt conveyor for bidirectional operation, the traditional curved profile aligning roller friction is two curves through the left fixed on the idler roller and the fixed friction plate produce a certain frictional force to turn the bracket, the belt running, the belt with the left or right curve roll contact curve and the curve to produce a roll friction, so that turned a certain angle bracket in order to achieve the purpose of aligning; mechanical stop roller reversible belt conveyor trough is aligning roller block single self-aligning roller device based on the improvement, which is characterized by both sides a resist roller, and the idler gear axis and the axis of the stick in the same plane perpendicular to the thrust receiving belt run exclusively for correction, for reversible belt machine; dual rotary center force transfer roller stopper block polarizer When placed on the axis of the roller rolls, as there are better detuning effect, a variety of tone polarizer rotation should be at the center of a good seal, waterproof and dustproof function in order to wash with water; cleaning conveyor roller group with the cleaning belt bearing surface viscous material, divided into flat-shaped comb idlers, idlers peace comb-shaped spiral idlers, generally return an empty segment in the head drum roller belt around the point to set up a group of spiral roller, then arranged five to six groups comb rollers; nylon rubber band large span flat plastic ring-shaped lower roller referred rubber ring rollers, its body is made of seamless steel rollers made of rubber ring is made of natural rubber vulcanization molding , rubber ring and the fixing roller body using neoprene adhesive. Plastic ring with a rotating part of the idler light weight, smooth running, low noise, good corrosion resistance, viscosity less coal, etc., so that the tape can run the tape self-centering, prevention deviation, good to protect the belt; parallel Two-way roller screw plastic ring structure, which has a rubber belt idler for better automatic cleaning effect, even high humidity, strong sticky tape and the material it is difficult to stick to rollers, especially in the northern regions, winter weather cold, sticky roller coal under serious use plastic ring roller can effectively remove caking coal, rubber conveyor belt tensioning device's role is to apply an initial tension of belt used to tighten the tape or tape elongation compensation, to ensure belt does not slip on the drive pulley, the rubber belts and rollers maintain sufficient friction between the driving force in the design range, the greater the initial tension, the belt and the greater the friction drive roller;