Heat-resistant conveyor belt type level maintenance methods

Author:admin　Source:Original　Updated:2013-6-21

ZhongBo Industry and Mining Machinery Co.,Ltd Main Products:

    General, heat (temperature), acid, oil, cold, abrasion, flame and other general performance of different cotton canvas (CC), Nylon (NN), polyester (EP) conveyor belts and other large angle flat file sideband tread belt, other special-shaped conveyor belt. And a roller, roller, frame, electric roller conveyors such ancillary products. Drive pulley; bend pulley; electric drum; magnetic pulley (magnetic drum); Care roll; stent; lug; tensioner; sweepers; couplings TD75 transportation machinery and ancillary products more than 200 kinds.

  Here I come to tell you about the heat conveyor belt maintenance methods.

   Divided into ordinary and strong heat resistant conveyor belt, with a strong layer of ordinary heat-resistant polyester canvas (CC56), a strong heat-resistant layer with strong EP (also divided into type EP100, EP150 type, EP200 type EP250, EP300 type, EP350 type, EP400 type, etc.). Heat resistant conveyor belt is mainly used in metallurgy, construction and other industries, transportation sinter, coke, cement clinker and other high-temperature materials, the material temperature does not exceed 800 ℃, with a surface temperature does not exceed 220 ℃ under the conditions of use. Nylon conveyor belt Price Reference: Super GB conveyor price 18 yuan / square meter. Nylon (NN) Conveyor Belt: Nylon 100 (NN100 conveyor) 23.5 yuan / square meter; 150 (NN150 conveyor) 25.5 yuan / square meter. Nylon 200 (NN200 conveyor) 27.5 yuan / square meter. Nylon conveyor belt (NN conveyor belt) and polyester conveyor belt (EP conveyor belt) is strong type conveyor belt, polyester conveyor belt per square meter than nylon high 0.5 yuan. Heat-resistant conveyor belt is made up of layers of rubber cotton canvas (cotton cloth) or coated with polyester canvas upper and lower temperature or heat-resistant rubber, high temperature vulcanization bonded together, suitable for handling 175 ℃ the following thermal coke, cement, slag and hot castings. Maintenance: conveyor belts in the use and preservation, should be kept clean to avoid direct sunlight or rain and snow Baptist leaching, prevent acids, alkalis, oils, organic solvents and other substances in contact and one meter away from the heating device. 1, save storage temperature should be maintained at 18-40 ℃, relative humidity should be maintained at 50 - 80%. Two different types, specifications layers conveyor belt should not be used together, the best use of their joint bonding method. 3, the conveyor belt drive pulley diameter and the relationship between the fabric layers, drive pulley, bend pulley supporting and groove angle on the roller conveyor requirements should be based on design requirements, a reasonable selection. 4, feeding should be directed to the running direction along the conveyor belt, the whereabouts of the material in order to reduce the impact on the conveyor chute should be adopted to reduce the material falling distance; conveyor feed section should be shortened by the roller spacing and using buffer roller is leakage of material with moderate conform with soft blocking plate to avoid stalls plate mark, scratch the surface of the conveyor belt. 5, the preservation period, the conveyor belt to be placed into a roll, not folded, turning once during placement shall be on a quarterly basis. 6, the conveyor belt running speed is generally not more than 2.5 m / s, large blocks, abrasive materials and the use of a large fixed speed unloading device should be adopted. 7, conveyor type, structure, size, number of layers should be based on the conditions of use reasonable choice.

Previous: Failure of the belt

[ list Home ]

Next: Endless conveyor bel