FAVORITES
FEEDBACK
SITEMAP
| conveyor belt problems | |||
| Author:admin Source:Original Updated:2013-6-15 | |||
Conveyor belt in the process of long-term use, there will be a variety of problems, Baoding Zhongbo below to give us a presentation, so that we better understand the conveyor belt:
1, the conveyor belt using the elongation problem, expert Q & A: Belt will stretch during use, some of which are elastic elongation, after the abolition of the external energy restitution, the other part is the preparation of skeleton material shrinkage elongation, this part can not be restored. Conveyor belts used in relatively small elongation of the polyester belt, the nylon belt elongation is relatively large, and the use of the process, nylon conveyor belt after the nylon fiber creep force is relatively large, so the use of process, the stretch ratio increased, but also because of the fiber creep, so the force after the abolition of the amount can shrink back much smaller than the elongation. 2, the conveyor belt counterweight there any requirements? Under normal circumstances, the counterweight is noted in conveyor operation situation to be in, but need to follow one principle: do not slip under the premise, counterweight the lighter the better. Many factors influence weight: weight position reasonable and unreasonable, roller surface active materials, such as wear and tear on the counterweight has a relatively large impact. 3, the conveyor belt deviation occurs in the course of the phenomenon, how should I do? Conveyor deviation occurs more reasons, such as conveyors often wandering, you need to check the equipment in good condition, correction roller swing flexibility, roller rotation flexibility, cleaning roller and roller surface material, check the parallelism of the head and tail wheel, checking the vertical counterweight holder, the counterweight roller parallel, check the blanking position, angle, etc.; the open air in the upper conveyor belt can be installed on the hood. For regular deviation of the conveyor belt, you can take to increase self-aligning roller, or aligning roller installed on side rollers and other methods; or tail wheel front ends of the two rollers alternately raise, tilt forward to Help centering straps. In the course of using the belt any problems, you can call with all HUAHENG Conveyor Co., Ltd. Wuxi senior engineer communication, we will be in the attitude of enthusiasm a bit for each customer service! | |||
|
