ZhongBo Industry and Mining Machinery Co.,Ltd  Main Products:
   
    General, heat (temperature), acid, oil, cold, abrasion, flame and other general performance of different cotton canvas (CC), Nylon (NN), polyester (EP) conveyor belts and other large angle flat file sideband tread belt, other special-shaped conveyor belt. And a roller, roller, frame, electric roller conveyors such ancillary products. Drive pulley; bend pulley; electric drum; magnetic pulley (magnetic drum); Care roll; stent; lug; tensioner; sweepers; couplings TD75 transportation machinery and ancillary products more than 200 kinds.

Here to tell you about special conveyor belt and the general difference.

Common type conveyor belt: This belt with fabric with a core, with the general camouflaged rubber material, smooth surface, with a core is made of cotton, nylon, polyester or vinylon fibers woven into the overall fabric delamination or . Cotton fiber is applied with the first core material, easy and rubber adhesion, slightly higher strength when wet, but the breaking strength is low, poor corrosion mildew, applied gradually increase, nylon fiber strength of up to 700N, water-resistant, anti-corrosion, circuitous fatigue; but larger elastic elongation, polyester fiber and nylon fiber similar performance, and the application of the elastic elongation of only half of nylon fiber is a promising material has expanded, vinylon fiber strength of 200N, elastic stretch longer than nylon fiber, easy and rubber adhesive, heat resistance, strength when wet but to land 10 to 25%, in the braid core fiber can be only one, two fibers can also be blended or mixed;
There are special steel cord conveyor belt, high angle belt, heat resistant belt, heat resistant belt, flame retardant tape, wire mesh and steel strips, etc.:
1 high angle belt: Contains low tread belt, high tread belt, diaphragm type band and wall type with several categories, short pattern cover with plastic on the obligation to face with a height of 10 mm below the various shapes of rubber convex blocks or ridges to prevent shifting layer material used for conveying powder and small particles of the bulk material, with the surface of the tread belt high bump height between 10 to 25 mm, to prevent the roll of material, for transport, the large size of the bulk material, the two belt can increase the transmission angle of about 10 degrees, with a diaphragm-type obligations surface has a high viscosity gel cover more than 100 mm of partitions, partition into shape double fin-shaped, multi-fin-shaped, V-shaped or a high bar shape, can be used to complete up to 53 ° tilt upward transport, wall or plate type band with wavy ribs transverse bulkhead, wall height of 40 ~ 300 mm, which can be completed with a vertical lift;
2 steel cord belt: a plurality of good flexibility and high strength special steel wire rope with a core fabric instead of a conveyor belt, since the 1960s, a large number of applications with steel cord, and its breaking strength of up to 7000 Bull / mm, elastic elongation minimal lateral stiffness is small, good impact resistance. Most applications of this long distance belt conveyor belt, in some belt feeder also has adopted;
3 heat-resistant conveyor belt: with special rubber cover material for industrial conveyor belt, conveying material temperatures up to 800 ℃;
4 hardy band: also use special rubber cover material conveyor belt, in -55 ℃ environment applications;
5 flame band: with special rubber cover PVC or rubber belt material, mainly used in coal mine; it with rollers or other mechanical friction is not easy to attack a strong flame attack and cause an explosion;
7 steel: thickness from 0.2 to 4 mm from the cold-rolled steel sheet, mostly used in the drying furnace conveyor.